GARBAFLEX 85
Flat wire
This propriety steel grade has high carbon content. It is especially intended for applications where high tensile strength is demanded.
| C (%) | Si (%) | Mn (%) | P max. (%) | S max. (%) |
|---|---|---|---|---|
| 0.80 - 0.95 | 0.10 - 0.30 | 0.30 - 0.60 | 0.025 | 0.020 |
For flat rolled wire
| Width (mm) | Tolerance (mm) |
|---|---|
| 4.00 | ±0.040 |
| 4.01 - 6.00 | ±0.070 |
| Thickness (mm) | Tolerance (mm) | Tensile Strength (N/mm²) |
|---|---|---|
| 1.00 | ±0.020 | 1965 - |
| 1.01 - 1.50 | ±0.030 | 1900 - |
Yield point
Yield strength: 80-90% of the tensile strength.
Elongation
Min%: 4
Camber
Max. 4 mm measured on 1 m length.
Surface
Bright or oxide.
Surface defects max 1% of thickness.
Density: 7.95 kg/dm3.
E and G modulus of elasticity
206 kN/mm²
E and G modulus of shear
79.5 kN/mm²
Additional information
Edges
Natural edges (edge treatment on request).
Decarburization
No total decarburisation. Partial decarburisation (no continuous zones)
max 1.2% of a corresponding round wire dimension.
Diagram.: Thickness vs. Width